Kelvin Lead Sets

Model KCL-B - Medium Kelvin Clip Lead

Medium size, one inch opening, Kelvin test lead pair, for use with HebTech Kelvin input Ohmmeters. Can be used with other meters. This is our most popular general purpose Kelvin test lead set for industrial use.

Model KC-B Small Kelvin Clip Lead

Model KCL-B - Medium Kelvin Clip Lead

The small alligator clips open to 0.25 inch [6.4mm]. The gold plated jaws are 0.125" [3.2mm] wide and individually insulated.

Model KPP - Dual Pin Probe

Model KCL-B - Medium Kelvin Clip Lead

Model KAP - Large Kelvin Clamp

Dual Pin Probe Kelvin Test lead set. Spring loaded test pins spaced at 1/10th inch for testing small contact areas. The Dual Pin Probes are excellent for making a Kelvin connection inside a small component or a connector shell.

Model KAP - Large Kelvin Clamp

Special Large 4 wire Kelvin clip lead set. Used for measuring large contact areas such as copper bars and large motor terminals, buss bars, ground stakes and power transformer terminals.

Model KPQ-1 Kelvin Test Lead

Model KAP - Large Kelvin Clamp

Model KPQ-1 Kelvin Test Lead

The Model KPQ-1 Kelvin Test Leads are an excellent choice for low cost general purpose Kelvin Test connections to medium and small connectors or wire. These test leads may be used with HebTech testers or with most Kelvin Ohmmeters supplied by other manufacturers.

RS-232 Interface Cable

Model KAP - Large Kelvin Clamp

Model KPQ-1 Kelvin Test Lead

This cable will connect the Serial Output port of the HebTech X-Series Ohmmeters to a computer or data logger DB9 style RS232 Port for data communications. This 6 foot long sealed cable is equipped with RFI suppression to eliminate outside interference sources in a noisy plant environment. Multiple cables can be connected in series up to 50 feet in length. Available Upon Request.

Connector MS97-6M

MS97-Series 6 pin male connector for rear panel test lead and relay connections. Includes shell, insert and strain relief. Available Upon Request